About company
Products
Services
Contacts
 
Slovak
English
Deutch
Russia
Hungary
Poland
 
 
 
PrĂ­pravky pre Pneuservisy
 
Silanic coupling agents
 
for more information »
 
SILADIL®S-70:
Film creating coupling agent on alkylethylene amino base with polymer bisphenolic skeleton. Viscosity max. 900 mPa.s /23 °C and amino number max. 350 mg KOH/g. With the addition of water, it creates coagulations, which by gradual hydrolisation in acidic pH dilute to a pure solvent. Hard film with increased resistance against water and alkalic compounds. Improving elasticity and cutting of fibres, their textile properties and drenching.
 
SILADIL®S-73:
Film creating coupling agent on the basis of ethylendiamine with polymer skeleton. Viscosity is max. 1000 mPa.s /23 °C and amino number 250 - 300 mg KOH/g. Water soluble in acidic pH. Hard film.
 
SILADIL® S-83:
Film creating coupling agent on the basis of ethylendiamine with hydrophilic polymer skeleton. Water soluble in acidic pH. Hard film.
 
SILADIL®S-448:
Film creating coupling agent unsaturated, with bisphenolic skeleton. Viscosity is 500 mPa.s/23 °C. Water soluble after hydrolisys in the acidic pH range. Hard film.
 
SILADIL®7300:
Film creating coupling agent on an ethylendiamine basis with polymer bisphenolic skeleton. Viscosity is max.1000 mPa.s /23 °C and amino number 250 to 300 KOH/g. Water soluble in acidic pH. Hard film.
 
SILADIL®S-77:
Film creating coupling agent on a polyaminoesteric resin base in the form of 50% solution in the solvent. Adding water immediately creates a pure solution . Hard, tenacious, pure thermosthetic film.
 
SILADIL®S-75:
Film creating coupling agent on an ethylendiamine basis with polymer skeleton. By adding to water, immediately a pure solution is created. Hard film improving textile properties of glass fibres.
 
SILADIL®S-80:
Film creating amphoteric coupling agent on a polyaromatic thermoplastics basis with amino group. By adding to water, immediately a pure solution is created. Very hard tenacious thermosethic film after drying.
 
SILADIL®S-79:
Film creating coupling agent on an oligomer thermosplast basis with amino group in the form of 50% solution in the solvent. Water soluble after hydrolysis in the acidic pH range. Hard film, specially suitable as a bonding media for thermoplasts (PE, PP, PA and similar) resins and similar.
 
SILADIL®S-7200:
Film coupling agent on an aminopropyltrialkoxysilane basis in the side chain with bisphenolic polimer skeleton. Water soluble after hydrolysis in the acidic pH range. Viscosity is max. 500 mPa.s/23 °C and amino number max. 250 KOH/g. Hard film with minimum colouring of glass fibres.
 
SILADIL®S-56:
Cationic coupling agent metakrylaminosilane. Water soluble i n acidic pH.Contains 50% alcohol as a solvent.
 
SILADIL®6500:
Film creating coupling agent on an oligoguanidine basis with hydrolysable trialkoxysilil groups in the side chain. Water soluble in acidic pH range. Hard film without any colour. Silane content min. 25% vol.
 
SILADIL®3650:
Aminosiloxanic coupling agent stable in both acidic and alkalic pH ranges. Amino number min. 200 mg KOH/g. Solvent content max. 40% vol.
 
SILADIL®7800:
Amphoteric aminocarboxylic silane increasing resistance against alkalic compounds in the application of glass fibres in the building industry. Solvent content approx 50% vol. Stable in full range of pH.
 
SILADIL®8650:

Polymer unsaturated trietoxysililpropylamine in solvent, applicable for modification fibrous and powder fillers and for preparation coating compositions.

 
SILADIL®8800:

Polymer unsaturated  aminoalkylsilan in solvent, applicable for modification fillers and as additive to resins and plastic for improving adhesion.

 
SILADIL®8900:

Film creating silane with epoxy groups in solvent, applicable for modification fillers used as reinforcement plastic material for improving abrasion properties.

 
SILADIL®1510-D:

Polymer silane water solution of hydrolysate with vinyl group, improving wettability filler in resins and thermoplastic. Modified filler had better powder density, better flowing and easier dispersed in polymers. Hard, shiny film.

 
SILADIL®1310-D:

Polymer silane water solution of hydrolysate with amino group improving wettability filler in resins and thermoplastic. Modified filler had better powder density, better flowing and easier dispersed in polymers. Hard, shiny film.

 
SLOSIL®-FA:

Organosilicon bisalkoxyaminooligomer in solvent for modification metalic surfaces, applicable as replacement of phosphatizing and chromodizing before paint application. Controlled hydrolyze should be prepared water solutions.

 
Copyright © 2007 SLOCHEM® s.r.o. All right reserved.